-Note that all this is rather experimental.
-
-This VS10 solution and the projects it includes are intented to be used
-in a GTK+ source tree unpacked from a tarball. In a git checkout you
-first need to use some Unix-like environment or manual work to expand
-the files needed, like config.h.win32.in into config.h.win32 and the
-.vcprojin files here into corresponding actual .vcproj files.
-
-You will need the parts from below in the GTK+ stack: GDK-Pixbuf, Pango,
-ATK and GLib. External dependencies are at least Cairo
-(with Cairo-GObject support, meaning Cairo 1.10.x or later), zlib, libpng,
-gettext-runtime, fontconfig*, freetype*, expat*. See the
-build/win32/vs10/README.txt file in glib for details where to unpack them.
-
-It is recommended that one builds the dependencies with VS10 as far as
-possible, especially those from and using the GTK+ stack (i.e. GLib,
-Cairo, ATK, Pango, GDK-Pixbuf), so that crashes caused by mixing calls
-to different CRTs can be kept at a minimum.
-
-zlib, libpng, and Cairo do contain support for compiling under VS10
-using VS project files and/or makefiles at this time of writing, For the
-GTK+ stack, VS10 project files are either available under
-$(srcroot)/build/vs10 in the case of GLib (stable/unstable), ATK**
-(2.x stable/unstable) and GDK-Pixbuf (unstable), and should be in the next
-unstable version of Pango. There is no known official VS10 build
-support for fontconfig (along with freetype and expat) and
-gettext-runtime, so please use the binaries from:
-
-ftp://ftp.gnome.org/pub/GNOME/binaries/win32/dependencies/ (32 bit)
-ftp://ftp.gnome.org/pub/GNOME/binaries/win64/dependencies/ (64 bit)
-
-Unzip the binaries obtained from ftp.gnome.org in <root>\vs10\<PlatformName>,
-and build the following, if not already done so:
-
-Note: put the resulting zlib, libpng, pcre and Cairo files as follows:
- .dll files: <root>\vs10\<PlatformName>\bin
- .lib files: <root>\vs10\<PlatformName>\lib
- .h files: <root>\vs10\<PlatformName>\include
-
-The recommended build order for these dependencies:
-(first unzip any dependent binaries downloaded from the ftp.gnome.org
- as described in the README.txt file in the build/win32/vs10 folder)
--zlib
--libpng
--(for GDK-Pixbuf, if not using GDI+) IJG JPEG
--(for GDK-Pixbuf, if not using GDI+) libtiff
- [libtiff requires zlib and IJG JPEG]
--(for GDK-Pixbuf, if not using GDI+) jasper [jpeg-2000 library]
--(optional for GLib) PCRE (version 8.12 or later, use of CMake to
- build PCRE is recommended-see build/win32/vs10/README.txt of GLib)
--GLib ***
--Cairo (inclusive of Cairo-GObject)
--ATK-2.x** ***
--Pango***
--GDK-Pixbuf***
-(note the last 3 dependencies are not interdependent, so the last 3
- dependencies can be built in any order)
-
-The "install" project will copy build results and headers into their
-appropriate location under <root>\vs10\<PlatformName>. For instance,
-built DLLs go into <root>\vs10\<PlatformName>\bin, built LIBs into
-<root>\vs10\<PlatformName>\lib and GTK+ headers into
-<root>\vs10\<PlatformName>\include\gtk-3.0. This is then from where
-project files higher in the stack are supposed to look for them, not
-from a specific GLib source tree.
-
-*About the dependencies marked with *: These dependencies are optional
- as those are not compulsory components for building and running GTK+
- itself, but note that they are needed for people running and building
- GIMP or those who need complex script support via fontconfig. They
- are referred to by components in Cairo and Pango mainly.
- Decide whether you need fontconfig support prior to building Cairo
- and Pango.
-
-**Regarding ATK-2.x: prior to compiling ATK-2.x, please open atkprops
- in VS under "Properties Manager" view (it is under any one of the
- build configurations, right-click on atkprops and select "Properties").
- Navigate to "User Macros", and edit the following fields:
- AtkApiVersion -> 2.0
- AtkLibToolCompatibleDllSuffix -> -2.0-0
- AtkSeperateVS10DLLSuffix -> -2-vs10
- Sorry this change did not make it upstream prior to ATK-2.0.0 release-
- this will be in the subsequent releases of ATK-2.x and was committed
- upstream.
-
-***:Put the sources of the packages marked with *** in <root>\<package-
- source-tree>, and build with VS10 from there.
-
---Tor Lillqvist <tml@iki.fi>
---Updated by Chun-wei Fan <fanc999@yahoo.com.tw>
+Note that all this is rather experimental.\r
+\r
+This VS10 solution and the projects it includes are intented to be used\r
+in a GTK+ source tree unpacked from a tarball. In a git checkout you\r
+first need to use some Unix-like environment or manual work to expand\r
+the files needed, like config.h.win32.in into config.h.win32 and the\r
+.vcprojin files here into corresponding actual .vcproj files.\r
+\r
+You will need the parts from below in the GTK+ stack: GDK-Pixbuf, Pango,\r
+ATK and GLib. External dependencies are at least Cairo\r
+(with Cairo-GObject support, meaning Cairo 1.10.x or later), zlib, libpng,\r
+gettext-runtime, fontconfig*, freetype*, expat*. See the \r
+build/win32/vs10/README.txt file in glib for details where to unpack them.\r
+\r
+It is recommended that one builds the dependencies with VS10 as far as\r
+possible, especially those from and using the GTK+ stack (i.e. GLib,\r
+Cairo, ATK, Pango, GDK-Pixbuf), so that crashes caused by mixing calls\r
+to different CRTs can be kept at a minimum.\r
+\r
+zlib, libpng, and Cairo do contain support for compiling under VS10\r
+using VS project files and/or makefiles at this time of writing, For the\r
+GTK+ stack, VS10 project files are either available under\r
+$(srcroot)/build/vs10 in the case of GLib (stable/unstable), ATK**\r
+(2.x stable/unstable) and GDK-Pixbuf (unstable), and should be in the next\r
+unstable version of Pango. There is no known official VS10 build\r
+support for fontconfig (along with freetype and expat) and\r
+gettext-runtime, so please use the binaries from: \r
+\r
+ftp://ftp.gnome.org/pub/GNOME/binaries/win32/dependencies/ (32 bit)\r
+ftp://ftp.gnome.org/pub/GNOME/binaries/win64/dependencies/ (64 bit)\r
+\r
+Unzip the binaries obtained from ftp.gnome.org in <root>\vs10\<PlatformName>,\r
+and build the following, if not already done so: \r
+\r
+Note: put the resulting zlib, libpng, pcre and Cairo files as follows:\r
+ .dll files: <root>\vs10\<PlatformName>\bin\r
+ .lib files: <root>\vs10\<PlatformName>\lib\r
+ .h files: <root>\vs10\<PlatformName>\include\r
+\r
+The recommended build order for these dependencies:\r
+(first unzip any dependent binaries downloaded from the ftp.gnome.org\r
+ as described in the README.txt file in the build/win32/vs10 folder)\r
+-zlib\r
+-libpng\r
+-(for GDK-Pixbuf, if not using GDI+) IJG JPEG\r
+-(for GDK-Pixbuf, if not using GDI+) libtiff\r
+ [libtiff requires zlib and IJG JPEG]\r
+-(for GDK-Pixbuf, if not using GDI+) jasper [jpeg-2000 library]\r
+-(optional for GLib) PCRE (version 8.12 or later, use of CMake to\r
+ build PCRE is recommended-see build/win32/vs10/README.txt of GLib)\r
+-GLib ***\r
+-Cairo (inclusive of Cairo-GObject)\r
+-ATK-2.x** ***\r
+-Pango***\r
+-GDK-Pixbuf***\r
+(note the last 3 dependencies are not interdependent, so the last 3\r
+ dependencies can be built in any order)\r
+\r
+The "install" project will copy build results and headers into their\r
+appropriate location under <root>\vs10\<PlatformName>. For instance,\r
+built DLLs go into <root>\vs10\<PlatformName>\bin, built LIBs into\r
+<root>\vs10\<PlatformName>\lib and GTK+ headers into\r
+<root>\vs10\<PlatformName>\include\gtk-3.0. This is then from where\r
+project files higher in the stack are supposed to look for them, not\r
+from a specific GLib source tree.\r
+\r
+*About the dependencies marked with *: These dependencies are optional\r
+ as those are not compulsory components for building and running GTK+\r
+ itself, but note that they are needed for people running and building\r
+ GIMP or those who need complex script support via fontconfig. They\r
+ are referred to by components in Cairo and Pango mainly.\r
+ Decide whether you need fontconfig support prior to building Cairo\r
+ and Pango.\r
+ \r
+**Regarding ATK-2.x: prior to compiling ATK-2.x, please open atkprops\r
+ in VS under "Properties Manager" view (it is under any one of the\r
+ build configurations, right-click on atkprops and select "Properties").\r
+ Navigate to "User Macros", and edit the following fields:\r
+ AtkApiVersion -> 2.0\r
+ AtkLibToolCompatibleDllSuffix -> -2.0-0\r
+ AtkSeperateVS10DLLSuffix -> -2-vs10\r
+ Sorry this change did not make it upstream prior to ATK-2.0.0 release-\r
+ this will be in the subsequent releases of ATK-2.x and was committed\r
+ upstream.\r
+\r
+***:Put the sources of the packages marked with *** in <root>\<package-\r
+ source-tree>, and build with VS10 from there.\r
+\r
+--Tor Lillqvist <tml@iki.fi>\r
+--Updated by Chun-wei Fan <fanc999@yahoo.com.tw>\r
projects / gtk+3.0.git / commitdiff